So some updates:

Finally rolled the chassis out to pressure wash the chassis to get ready to paint it. Gonna do the front, then when i have the cab back on I'm gonna take the bed off and do the same thing.
IMG_20170225_133242387_HDR.jpg
Then something came in the mail!!!
IMG_20170227_162034994 1.jpgIMG_20170227_162711176 1.jpg
Dropped those off at the machine shop and thanks to Uncle Spence here on the forums i got my missing grill! Thanks dude!
IMG_20170304_141931895.jpg
Also dropped the pistons off and got the block back from the machine shop! Looks fancy.
IMG_20170306_193812556.jpgIMG_20170306_193817506.jpg
Unfortunately the money dried up again and the project is going to be on hold financially for a few months again.
Next steps include:
Finish cleaning a painting the chassis
Remove all the mounts for the factory air-box and brake lines and such in the engine bay
Drop cab back on chassis with the block, head, and tranny in to see how I'm going to weld my new firewall to clear the coolant thing on the head.
Weld new floorboard and new firewall in
Prep engine bay for paint
Paint engine bay
Clean the under-body of the cab and paint with truck bed liner
Put engine and tranny back in
Begin wiring harness dissection and modification

That's all i can think off of the top of my head but any advice or opinions on any of that stuff I'd love to hear it!