O and Geezer to answer your question. The heater box has a gap about a inch and a half from the firewall to allow that sound deadening blanket to fit properly so I made my new piece about a inch deeper than the original firewall. I might need to make some mounts for the heater core but it shouldn't be to much of a issue. And I could have moved everything forward but I didn't want to make custom engine mounts, tranny, and extend the driveshaft. Last time I had the block on the chassis I put the head on to test and I'm not going to lie there was like a quarter of a inch of room so hopefully what I just did will give it enough room to fit even if its a little tight.
Bookmarks