Results 1 to 4 of 4

Thread: electrical issues

  1. #1

    Array
    Status
    Offline
    Join Date
    05-15-2014
    Posts
    11
    Location

    new jersey
    Vehicle

    1988 Dodge Power Ram 50
    Engine

    G54B

    electrical issues

    do you guys know if there is a relay that would run the coolant gauge and gas level gauge my 88 ram was sitting for about a year changed the battery the gauges worked with the nearly dead battery but once i started it with the new battery the first time gauges dropped all the way truck runs and fuses are good

  2. #2

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    No relays in the sensors, but these trucks can get all kinds of gremlins in the electrics from bad grounds. Disconnect all the ground leads in the engine bay and give the terminals a good clean along with the ground lead bolts. Check you battery leads too. If you lost your gauges in one hit it would tend to indicate a single fault rather than a bunch of individual issues.

  3. #3

    Array
    Status
    Offline
    Join Date
    05-15-2014
    Posts
    11
    Location

    new jersey
    Vehicle

    1988 Dodge Power Ram 50
    Engine

    G54B
    checked/cleaned all grounds it is the horn the gas level and temp gauges not working cluster backlights fine all lights are fine is there a good diagram somewhere

  4. #4


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    Follow this Link http://www.mightyram50.net/vbulletin...-Manual-inside

    Download the Haynes Manual for the Truck. There is an electrical section. plenty of diagrams broken out by circuit...

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •