Results 1 to 10 of 10

Thread: 1990 Ram 50: in the HOT desert - which radiator cap?

  1. #1

    Array
    Status
    Offline
    Join Date
    10-27-2014
    Posts
    63
    Location

    United States
    Vehicle

    1990 Dodge Ram 50
    Engine

    Other

    1990 Ram 50: in the HOT desert - which radiator cap?

    Summer approacheth in the Mojave Desert and it will regularly get upwards of 118° ... or higher. Need a radiator cap and Haynes manual says 12psi to 15psi for my vehicle. Which psi rating would be "optimal," considering the temps to come?

    Thank you all. And there are only 217 shopping days till Christmas!!

    Christopher

  2. #2

    Array
    Status
    Offline
    Join Date
    12-21-2013
    Posts
    1,258
    Location

    Maurertown, Virginia
    Vehicle

    1990 Dodge D-50
    Engine

    4G64
    I would think the standard 13 psi should be fine. As long as your overflow bucket is in good shape, it's gonna do what it's gonna do.
    The greatest gift you have to give to the world is that of your own self~transformation.

  3. #3

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    Don't go to high PSI rating caps, especially if your engine is going to experience stress from high temperatures. I'm an ignoramus on the cooling system in the gen 2 trucks, but if it is running a water pump pulley driven clutch fan I'd be upgrading to an electric thermo fan. If your engine is gonna bake, it will do it while sitting in traffic as the fan will only flow air at low speed. Easy to set up, cheap to buy, frees up engine bay room, way more efficient, saves your water pump bearings and will yield an improvement in throttle response.
    What's not to like?
    Last edited by geezer101; 05-22-2016 at 04:23 AM.

  4. #4

    Array
    Status
    Offline
    Join Date
    10-27-2014
    Posts
    63
    Location

    United States
    Vehicle

    1990 Dodge Ram 50
    Engine

    Other
    Yes, I think you're right. Thanks!

    Quote Originally Posted by royster View Post
    I would think the standard 13 psi should be fine. As long as your overflow bucket is in good shape, it's gonna do what it's gonna do.

  5. #5

    Array
    Status
    Offline
    Join Date
    04-09-2014
    Posts
    550
    Location

    sheffield, vt
    Vehicle

    1978 Dodge D-50
    Engine

    G63B

  6. #6

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    +1 on that idea. If your engine is getting hammered from heat continuously venting the hood will make a big difference. I'm not a fan of rivetted look of those louvre vents - I preferred the method Merill used to vent his hood. IMO it had a much cleaner look to it.

  7. #7

    Array
    Status
    Offline
    Join Date
    09-26-2014
    Posts
    494
    Location

    Ca
    Vehicle

    1993 Dodge Ram 50
    Engine

    4G64
    ChristopherASA,
    Just curious, Your engine is listed as ' other ' ?? as in not a 4g64 ?
    Thx .

  8. #8


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    Well, I'm going the other way...I used a 15 Lb cap when I was Racing because the higher pressure raises the boiling point. I agree on the electric fan being easier on the water pump, but the Mojave Desert doesn't have a lot of Traffic to get stuck in unless your headed El Mirage dry lake on a Race Day :-)

  9. #9

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    lol I know Mike but if it's gonna cook, it'll do it somewhere where you least want it to. I would've steered away from a high pressure cap unless I was confident all my hoses, radiator and even the heater core weren't looking 'iffy'.

  10. #10


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    Well I get your point, I was making assumptions on maintenance, My radiator was a new fluidyne and what's a heater core :-)

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •