Looks like that's the way we're going. Roll our own.
Looks like that's the way we're going. Roll our own.
Looks like I'm going to have to bake one up myself. Only 1-off machine shop here wants $100 an hour and figures 2-3 hours to make the pump block off plate and one for the EGR. NOT paying anyone $2-300 for a couple of pieces of aluminum. Sucks.
...an offcut of 5mm alu sheet, a sharpie, a jigsaw and a power drill. Add a file and some wet and dry and shake for 30 minutes. Done. CNC'ing one out of billet would look nice and everything but just not worth the cost for a one off. A shop should be able make something like this in under an hour easily.
Part1516.jpg
install1.jpg
I used a couple these for blocking those holes. EGR and FUEL PUMP. They are on the wall at Autozone and Oriellys in there v8 chrome parts section. I just had to open bolt holes a little bit more to align the bolts to their install. There are 2 sizes, bring your old gasket or write the part number down I used.
Has anyone used the Delphi Fuel Pump Block-Off Plate FA0007 successfully?
Bookmarks