-
Webber 32/36
I have a 1987 mm 4x4 with a 2.6 that I acquired recently. I have a Webber carb that I took off a previous mm I owned. It's in good condition and worth reuseing but, I don't have any instructions on how to install it (what vaccum lines I can do away with etc.) I've looked but with no luck found any good info. Can someone post some pics, instructions or anything would be helpful. Thanks in advance!
-
Doctorates Degree
Array
We got an entire thread dedicated to the Weber install right here - http://www.mightyram50.net/vbulletin...10-Weber-32-36.
I've also added a tip for modding the manifold to delete the coolant port when using an electric choke on another thread - http://www.mightyram50.net/vbulletin...tions-2-0-G63B
-
Thanks geezer101 I really appreciate it. I need all the help I can get. I'm a small engine guy but this is my first real "bigger" endeavor in a auto
-
I've got a local carb shop that will install it and guarantee it out the door for $420 and that's removing all the vac lines etc. A new Webber is around $290 so basically $130 labor and I don't have to touch it and again it's guaranteed. What do y'all think?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks