Results 1 to 14 of 14

Thread: air flow sensor

  1. #1

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64

    air flow sensor

    My mass air glow sensor died on the way home from work. Can I get one off another mitshubushi car as there are no mm or ram 59 cars around here.

  2. #2

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I stood on the gas then the engine quit. It would only run with the mass air sensor unplugged.
    I'm assuming that it has failed.
    What I don't understand is why it failed when I stood on the Gas...rge revs were down and not even a lot of air would have gone past the sensor.

  3. #3

    Array
    Status
    Offline
    Join Date
    10-12-2012
    Posts
    53
    Location

    N*Y
    Vehicle

    1995 Mitsubishi Mighty Max
    Engine

    4G64
    if i'm right those air flow sensor got to match ur ECU or won;t work

  4. #4

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    Not one warehouse in Canada has one

  5. #5


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    Junk yard or Mitsubishi's Atlanta wharehouse.

  6. #6

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I did managed to find a reman in Alberta fir $200 ..I hop to have it next week but I won't be able to run down the track on Sat

  7. #7

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    Still trying to figure out how flooring the gas can make a map sensor fail....

  8. #8

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I just checked the air flow sensor on my truck and it is off of a mitsh expo with a 2.4 litre.
    Looks like mine has been replaced in the past.
    Would a 2.4 in an expo have different mapping than a ram 50.
    The replacement air flow sensor is really cheaper and still available.
    E5T05171

  9. #9

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    It even has a different cardone part number 746001 and the proper one for my truck is 746009...
    I'm really curious what the difference is.
    They are both vortex air flow sensors..mount the same and the same engine.

  10. #10

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B
    Get the right one for your application. Think of all the possible differences between your truck and the Expo it came off of. 7 bolt vs. 6 bolt, automatic vs. stick, 16V vs. 8V, California emissions vs. Federal, who knows what else? Stick with the correct part for the application.

  11. #11

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I ordered the correct part but interested as to why this part was on my truck.

  12. #12

    Array
    Status
    Offline
    Join Date
    04-24-2011
    Posts
    331
    Location

    Orlando, FL
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    G64B
    The mitsubishi maf sensor for the non turbo vehicle are the same with a bolt in air horn, later on they glue on the air horn
    O9RTW.jpg
    20121224_084203_zpsfbd4f6ac.jpg
    lancer_eclipse_maf_compare.jpg

  13. #13

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I got the new sensor and immediately the truck drove better...it seems to have fixed the idle issue and now it makes sense that probably it was dumping fuel in every time it got a bad reading.
    cardone really butchers the case to get them apart to change the internals.
    The check engine went right off.
    I'm thinking off opening the old one to look inside if anyone is interested.

  14. #14

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    Well..I'm still getting intermittent idle issues..time to open up the ecm

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •