Results 1 to 9 of 9

Thread: 2.6 head gasket issues

  1. #1

    Array
    Status
    Offline
    Join Date
    09-01-2012
    Posts
    9
    Location

    Denali Park, Alaska
    Vehicle

    1986 Dodge Power Ram 50
    Engine

    G54B

    Question 2.6 head gasket issues

    Hello all,
    I have an 85-86 Power ram 50 with a G54B engine(I think- that's what it says on the sticker). It is currently at about 247K on the clock on it's 2nd head gasket(maybe more).
    I think it is starting to leak again, grey smoke, so I will be pulling it apart and sending it out to get resurfaced and checked.
    So my main question is: Is there another Mitsubishi engine that would be a good/relatively simple drop in replacement?
    I am looking for something that would fit without lot's of mods. I have a pile of projects ahead of it in the list and it is my ride to work, not stranded but would prefer to drive it instead of other rigs in the fleet.
    I will be going for the interim fix to get it by, but would rather do a swap eventually or even find another 2.6 I could rebuild for an easy change out. It has some rust but is a nice ride , and a perfect truck to drive on the 80 mile dirt road I drive out to work every other week.
    Thanks

  2. #2

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B
    Diesel 4D55/6.

  3. #3

    Array
    Status
    Offline
    Join Date
    09-01-2012
    Posts
    9
    Location

    Denali Park, Alaska
    Vehicle

    1986 Dodge Power Ram 50
    Engine

    G54B
    Interesting, would it need a larger/thicker radiator?

  4. #4

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    360 Mopar...

  5. #5

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B
    The 2.6 radiator should suffice.

    I'm not sure what the climate conditions are like in Alaska but here in the lower 48, you never can cool these engines too much really. I'd get an external oil cooler, an electric fan and an all aluminum radiator from Shepherds for extra extra insurance and improved performance. But that may not apply to your climate and driving conditions.

    http://www.shepherdautoparts.com/all...ighty_max.html

  6. #6

    Array
    Status
    Offline
    Join Date
    09-01-2012
    Posts
    9
    Location

    Denali Park, Alaska
    Vehicle

    1986 Dodge Power Ram 50
    Engine

    G54B
    Ok, how about weight, I've seen the power ram 50s with diesel engines - they all had leafs on all 4 corners, the 86 uses the torsion bars.

  7. #7

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B
    4D56 is the same engine family as the G54B. They're both Astron blocks. The diesel is slightly heavier. There are heavy duty coil springs available on RockAuto.com.

  8. #8

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B

  9. #9

    Array
    Status
    Offline
    Join Date
    09-01-2012
    Posts
    9
    Location

    Denali Park, Alaska
    Vehicle

    1986 Dodge Power Ram 50
    Engine

    G54B
    Ok that's promising, would they be a coil over shock? Mine just has straight torsion bars. Iay end up reinventing the wheel here. Freight is spendy., and we have limited access to wrecking yards

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •