Never seen them before, but as I am looking for a new header for my 4x4, I'd very much like to!
Let me know what ya can come up with.
I bet Pennyman will know.
Never seen those before. Looking at them I'm maybe thinking custom/home made?
09 BMW 335i E92 Twin turbo
89 Macrocab 4g63 Turbo swapped & Bagged: Build Thread
Also wanted to ID the head. Pennyman said
So is this a non-MCA jet head with the two bolts to the left of the housing? This is a narrowblock 2.6 from a truck if it makes a difference.The early version 2.6 and g52b 2.0 heads can be determined by the bolt pattern by the thermostat housing. if both bolts at the front of the manifold are to the left of the manifold, then it is an early head. If one bolt is to the left, and the other is under the manifold - it is the later head. You can remove the jet valves and replace them with jet valve eliminators from Silver seal.
not sure on the header, and I can't tell from the picture whether it is 1 or 2 bolts there.
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980