Results 1 to 19 of 19

Thread: Weber Passes Ontario Emissions

  1. #1

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B

    Weber Passes Ontario Emissions

    I took my 2wd in for emissions last week and it passed no problem. I installed the Weber last fall and have been concerned about the emissions test. I leaned it out to the max for the test and had a full tank of premium fuel. They use a 2 speed idle test with a sniffer in the tail pipe. Here are my results.



    IMG_0001.jpg

  2. #2

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B
    They don't even measure NOx, that sure helps!

  3. #3

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    They don't use the dyno any more. I have a vacuum line going from the EGR to that aluminum box on the fender just to pass the visual. It does nothing.

  4. #4

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    That's is a TON better than what my 91 with Fuel Injection tested 2 weeks ago on the Ontario Emmisions

  5. #5

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64

  6. #6



    Array
    Status
    Offline
    Join Date
    10-10-2014
    Posts
    136
    Location

    Meridian, Idaho
    Vehicle

    1984 Dodge D-50
    Engine

    G54B
    I started registering my trucks in a county that doesn't have the emissions requirements. I know.... be jealous.

  7. #7

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    Well it still passed. Have you ever had the cat replaced?

  8. #8

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    No... they said I probably need one. Probably an O2 sensor also.
    Your runs really clean compared to mine.. that's for sure

  9. #9

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    well you have another 2 years to work on it now. How's your gas mileage?

  10. #10

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    seems good. Not sure since the speedo cable broke and I'm having a heck of a time trying to get another one that isn't coated in gold... I have been using the GPS on my phone right now for a speedo.
    I'm figure maybe 25MPG?
    Hard to compare to the 33 I get with my neon

  11. #11

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    I just got a complete interior out of a '91 with a 2.4L automatic. When I pulled the cluster the cable was there. I left it there as I didn't need it. I got the whole interior for $150. All I left was the heater box and blower. I'll bet he'll sell you that cable for less than anyone else. http://www.tracyauto.com/. If that doesn't work for you check out mitsubishiparts.net.

  12. #12

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    thats about 4 hours from here!!!

  13. #13

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    yes it was quite a drive for me as well. When I called Tracy's I was looking for a back slider window that car-part.com said they had. When I phoned them I found out they had the whole truck. You can use car-part.com to find recyclers close to you that might have what you need but they don't advertise it. For example; J and B Auto Wreckers in Windsor has an automatic tranny, engine, bed, and control arms for a '91 Ram 50 with a 2.4 litre. They probably have the truck with with the cable you want still there. I call a lot of places looking for parts and sometimes it pays off.

  14. #14

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I'm off tomorrow so I will call. I'm near Chatham ON so it's not to far to go.
    It seems many more had a stick then automatic.

  15. #15



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    Most of those places on car-part.com will ship. Thats how I got my LSD diff.

  16. #16

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    Yes they will. I guess it all depends on what your getting. If what you want is worth the cost of shipping and going to get it is impractical it's great. I like going to the recyclers and taking off my own parts when I can. I usually find more than what I was looking for in the first place and I get to inspect the stuff before I pay for it. When I get to the counter with a whole lot of stuff I think I get a better deal. Instead of them trying to price each part individually they just look at it and throw a round figure at you. Then you get to haggle a bit..lol

  17. #17

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I called 8 yards in my area... not one truck

  18. #18

    Array
    Status
    Offline
    Join Date
    09-30-2012
    Posts
    394
    Location

    Vanessa, Ontario
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    they are getting scarce. http://mitsubishiparts.net/parts/ind...?siteid=218241 might have your cable. They do ship to Canada but I think it's best to call the 1-800 number and order. If they have it it will be a brand new Mitsubishi part. The cable for the auto trans is listed at $48 U.S. I've ordered from them a few times and they're reliable. They're in Washington State so 3 hours behind us.

  19. #19

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I contacted them last night by email on their page. Just waiting on a response.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •