Quote Originally Posted by LukeGirard View Post
So I'm having a problem. The engine swap went great but I can't get it to stay running. The engine isn't getting gas. I looked at the hardlines and some were kinda dented from the engine smacking into them so I replaced them with good hardlines from my parts truck. I can't get it to stay running and it's really frustrating me. If anybody can think of why it's doing this please let me know.

Check your soft lines back by the tank, check your fuel filter, get it running on starting fluid long enough to prime the pump and fill the carb, but it sounds like you might have an air leak somewhere along the way, or the pump isnt picking up enough to prime itself, pull the line from the pump to the carb off and have someone crank it over while you hold the hose into a bucket, make sure fuel gets flowing then put it back on the carb, sometimes the pump can't prime when it's all hooked up.