Results 1 to 14 of 14

Thread: 1st gen lift questions

  1. #1

    Array
    Status
    Offline
    Join Date
    02-02-2015
    Posts
    6
    Location

    Ivanhoe NC
    Vehicle

    1982 Dodge Power Ram 50
    Engine

    G54B

    1st gen lift questions

    Was wondering if anyone had any experience with the Montero UCA swap. Is it a direct bolt on, will longer shocks be needed with a MILD torsion bar crank, etc. Any feedback would be greatly appreciated!

  2. #2

    Array
    Status
    Offline
    Join Date
    04-09-2014
    Posts
    550
    Location

    sheffield, vt
    Vehicle

    1978 Dodge D-50
    Engine

    G63B
    the johnbaker kit utilized longer shocks...as you mentioned MILD torsion cranking will prevent huge issues. I also purchased the johnbaker exterior shock kit & installed air shocks to lessen the tension on the sway-a-way torsion bars (but they still both snapped).

  3. #3




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    man, you got to quit teasing the youngsters with all the toys we could buy back then for our trucks - if I only had bought the torsen locker back then...
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  4. #4



    Array
    Status
    Offline
    Join Date
    07-24-2012
    Posts
    2,363
    Location

    Washington State
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    G63B
    Pennyman, all your stuff can fill a factory! You need to start up re-manufacturing Mitsubishi trucks again. I know you have enough stuff to build a parking lot full of 1st gens. I would place an order if I knew I could get it in my lifetime. JK!

  5. #5




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    but ragragtimetime has the 1st gen fleet - I only have 2...
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  6. #6



    Array
    Status
    Offline
    Join Date
    07-24-2012
    Posts
    2,363
    Location

    Washington State
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    G63B
    I think he drives around late at night with an empty trailer looking for 1st gens parked on the street in the nearby towns, cornering the market.

  7. #7

    Array
    Status
    Offline
    Join Date
    02-02-2015
    Posts
    6
    Location

    Ivanhoe NC
    Vehicle

    1982 Dodge Power Ram 50
    Engine

    G54B
    That old ad is awesome ragragtimetime. Sweet truck too. I'm guessing the john baker parts are next to impossible to find. Ive recently acquired a fairly mint 82 sport 4x4. Even still wearing the factory 14 sport wheels. Only have 1100 in the truck so I'd like to lift the front as cheap as possible but done right. Which brings me back to the Montero UCA swap. Thanks for the info so far!

  8. #8

    Array
    Status
    Offline
    Join Date
    02-02-2015
    Posts
    6
    Location

    Ivanhoe NC
    Vehicle

    1982 Dodge Power Ram 50
    Engine

    G54B
    A pic of the beast.
    Attached Images

  9. #9



    Array
    Status
    Offline
    Join Date
    07-24-2012
    Posts
    2,363
    Location

    Washington State
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    G63B
    We always like them photos

  10. #10

    Array
    Status
    Offline
    Join Date
    02-02-2015
    Posts
    6
    Location

    Ivanhoe NC
    Vehicle

    1982 Dodge Power Ram 50
    Engine

    G54B
    Thanks

  11. #11

    Array
    Status
    Offline
    Join Date
    04-09-2014
    Posts
    550
    Location

    sheffield, vt
    Vehicle

    1978 Dodge D-50
    Engine

    G63B
    you had mentioned a specific rim offset to be used for the build, thought this would be helpful (the stock rims will NOT fit with the john baker uca's)

  12. #12

    Array
    Status
    Offline
    Join Date
    04-09-2014
    Posts
    550
    Location

    sheffield, vt
    Vehicle

    1978 Dodge D-50
    Engine

    G63B
    yeah...so i was always think'n cuz i have a stock spare....if i get a front flat....i'll have to move a rear to the front & put the spare on the rear.

  13. #13

    Array
    Status
    Offline
    Join Date
    02-02-2015
    Posts
    6
    Location

    Ivanhoe NC
    Vehicle

    1982 Dodge Power Ram 50
    Engine

    G54B
    Thanks for the info. That had crossed my mind because I ran into that problem running stock rims on a lifted yota.what size tire and rim combo are running in that earlier pic.

  14. #14

    Array
    Status
    Offline
    Join Date
    04-09-2014
    Posts
    550
    Location

    sheffield, vt
    Vehicle

    1978 Dodge D-50
    Engine

    G63B
    3&1/2 with 31.5"

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •