Results 1 to 3 of 3

Thread: I did a dumb thing...

  1. #1

    Array
    Status
    Offline
    Join Date
    07-24-2014
    Posts
    6
    Location

    South Carolina
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    4G64

    I did a dumb thing...

    ...and removed by distributor without marking the alignment of the rotor. This is on a 1990 with the 2.4 FI engine. What do i need to do to make sure the timing wont be off when i re-install the distributor?

  2. #2


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    Put the engine at TDC on the #1 Cylinder (Cam and Crank marks set),put the rotor on the Distributor to point at the #1 Position on the cap (remove the cap and paint a line on the base with white out). install and time the motor according to the manual...

  3. #3

    Array
    Status
    Offline
    Join Date
    03-21-2013
    Posts
    234
    Location

    Georgia
    Vehicle

    1984 Dodge D-50
    Engine

    4G63
    ^^^^^^what mike said^^^^^^

    That's the same engine as mine.

    If you're not sure of TDC, pull the no.1 spark plug, and see if you can see the piston.

    Easy~~peasy

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •