Results 1 to 4 of 4

Thread: Rocker Arm Install

  1. #1

    Array
    Status
    Offline
    Join Date
    03-02-2014
    Posts
    28
    Location

    Colorado Springs, CO
    Vehicle

    1988 Mitsubishi Montero
    Engine

    G54B

    Rocker Arm Install

    I got the bolts out of the cylinder head and am getting ready to bolt the rockers back on. Does anyone use blue thread locker on these to keep them from backing out or should I just torque 'em down per the FSM?

  2. #2


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    I just torque to spec, but Blue locker won't hurt.. personal choice.

  3. #3

    Array
    Status
    Offline
    Join Date
    01-16-2018
    Posts
    6
    Location

    Visalia ca
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    Do you knw the torque spec for rocker arm install

  4. #4

    Array
    Status
    Offline
    Join Date
    01-24-2017
    Posts
    1,209
    Location

    New Zealand
    Vehicle

    1981 Mitsubishi L200
    Engine

    Other
    Haynes manual gives
    2.0L (79 thru 1982) and 2.6L 4cyl
    camshaft bearing cap bolts - 15 ft-lbs

    2.0L (1983 thru 1989) and 2.4L 4 cyl
    camshaft bearing cap bolts (rocker arm shaft bolts)
    8 x 25 - 15 to 19 ft lbs
    8 x 65 - 14 to 15 ft lbs


    3.0L v6
    rocker arm shaft bolts - 180 in-lbs

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •