Over the Christmas slow down I finally got around to building the jack mount and hold down. The mount is removable and is held in place with hose clamps and saddles onto the rear cage. The jack is held in place with a ratchet strap in 4 channels made from small box tubing with one side cut off.


The tubing fit the jack rail nice and tight. It is kept from moving side to side with some little stops on each end of the jack. The handles are mounted with some through bolts and wing nuts. To keep them from rattling around I used a peace of hose between the tubing and handle on the mount bolt.

DSCN4488.JPG DSCN4485.jpg