So I replaced my valve stem seals, headgaskets and manifold gaskets along with other smaller gaskets and o-rings, i also did a new timing belt and silent shaft belt. But when i went to start it up I noticed smoke coming from the exhaust manifold and downpipe. I thought it was just oil that had spilt when i removed my head but after a while it got worse so i shut it off, Any ideas on why this could be happening? also i checked the tailpipe and although its not smoking a lot anymore, water is still dripping from it. I was told it might be residual water in the muffler from when it had a cracked HG and the only way to remove all this water would be to drill a hole in the muffler. Does this sound right?
Thanks guys.