What is the real stroke on the truck G63B?
ok sooooo i see here on this site under the wiki pages that the truck motor G63B had a 85mm bore and 100MM stroke right?
but everywhere else i look it says the G63B is a 85mm bore and 88mm stoke. same as the 4G63.
so can anyone confirm if because our G63B was in a truck it got a 100mm stroke? or is this just one big typo....
The 85mm x 88mm dimensions are correct for the G63 designated engines (actual capacity of the G63 is 1.997 litres). If your truck has a 100mm stroke it works out to be about 2.27 litres (your truck is most likely running a 4G64 crank...)
then this sticky in the wiki info needs to be changed
Will check it out asap. These numbers were collected from reliable sources though we are all human and prone to mistakes. I know I make plenty of them here, just ask Pennyman. I personally will look into this and correct it.
Originally Posted by thehive
Thank You for catching this, it is appreciated and we do not like to post information that is incorrect.
Tags for this Thread