Results 1 to 2 of 2

Thread: How to install an aftermarket tach in 1994 mighty max that had no factory tach

  1. #1

    Array
    Status
    Offline
    Join Date
    10-06-2016
    Posts
    3
    Location

    RIVERDALE GA
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    4G64

    How to install an aftermarket tach in 1994 mighty max that had no factory tach

    I have not been able to get my aftermarket tach to work. The truck has a 2.4 engine and 5 speed manual transmission and did not come with a tach. I have tried to connect the signal lead from the tach both of the post with wires screwed on that are attached to the coil and there is no response at all from the tach. Is there some place that the connection should be made and if so can any one send me a picture.

  2. #2

    Array
    Status
    Offline
    Join Date
    09-10-2015
    Posts
    26
    Location

    San Jose, Costa Rica
    Vehicle

    1988 Mitsubishi Mighty Max
    Engine

    Other
    Look if the tach has power And ground, also look if the sender wire is damaged somewhere, if all wires are ok maybe your tach is gone.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •