-
Junior
Array
88 ram 50
So, I just bought a 88 custom sports cab, and needs new crankshaft bearings, any one done a replacement before? advice would be appreciated.
-
Junior
Array
Update, got all the pan bolts undone, but not sure how to remove pan from under neath the truck
-
If its a 2.6 it's a pita because you need to lift the motor a lilnto get the pan off.
-
Junior
Array
yeah lifted the motor and did what i needed to do, but now i cant seem to get the mounts lined up. ever had this issue??
-
Junior
Array
its lined up front to back of the bay, but the mount bolts and holes wont line up.
-
You should try the 2.0L in an 86. The mounts are a total PIA to line up. I found if you jam a screw driver in the hole and line them up as best as possible tha way it can help a little. I'm not sure if its the bolt threading or what but getting them started is not fun. I spent almost 3 hours one night trying to get one lined up. I finally undid the other side and lined up the hard side and stuck a rod into the holes to line them up and fianlly got it. They are difficult.
-
Junior
Array
I will give that a shot. Was it still hanging from the hoist when you did this?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks