Results 1 to 5 of 5

Thread: Battery behind passenger seat? Should there be a tray and tie down?

  1. #1

    Array
    Status
    Offline
    Join Date
    02-15-2014
    Posts
    28
    Location

    Portland Oregon
    Vehicle

    1984 Mitsubishi Mighty Max
    Engine

    4D55-T

    Battery behind passenger seat? Should there be a tray and tie down?

    So I've got a battery and it doesn't fit in the battery area behind the pass seat. Its a little bit too small. should there be a bottom that keeps the battery in place? and or a tie down I'm not sure if I'm missing a piece or don't have the right size battery. Any thoughts would be appreciated.GOPR0875.jpg

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Never seen one there. But you need a hold down. Just find one that fits. It will work just fine.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  3. #3

    Array
    Status
    Offline
    Join Date
    06-08-2011
    Posts
    33
    Location

    FL
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    G63B
    At one time Eddietude had that part, don't know if it is still available.

  4. #4




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    that is the place where a diesel battery goes - pm Mike Warme for the right parts for the battery hold down.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  5. #5

    Array
    Status
    Offline
    Join Date
    04-07-2011
    Posts
    275
    Location

    Burbank, CA
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    4D55-T
    I've got the brackets and the bottom tray that it sits on as well as the removable bed piece for that battery. Let me know what you need. As for the hold down itself you'll have to make one. This was the norm for 84-85 diesels . I remove all the EGR crap from them and saw trays from gassers and weld in where they went on the 83's which is under the hood! This eliminates all that length battery cable. Pretty sure its a group 34 battery

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •