4wd dash light help

[kalexander]

okay thanks to "camoit" i looked at the manual and found out that those switches were actually the 4wd light switches. Is there any way to test the switches, maybe check ohms will switch is depressed and when the switch isnt?

[kalexander]

okay i removed the switches and test there continuity.

Both switches were inconsistent.

ohm reading with pin on switches out are 0.01

ohm reading with pin on switches in are not reading on the multimeter. (as if i hadn't connected it to anything).

Btw there was some oil in the switches.

Not all the time they return to 0.01 sometimes they dont return at all and sometimes its a higher reading around 10 and sometimes at 50-80.

[kalexander]

also the light dosent come on like the others when you put the key to "on"