Autohubs not locking in 4wd, 94 MM 3.0

[camoit]

I would use manual hubs. Then you know your in or out. I ordered my ford with manual hubs because I don't trust the vacuum systems.
There is not much to make them lock. So if they grind they pretty much go bad real quick. They only move about 1/8 inch to lock in.

[Rivals Inc]

I would use manual hubs. Then you know your in or out. I ordered my ford with manual hubs because I don't trust the vacuum systems.
There is not much to make them lock. So if they grind they pretty much go bad real quick. They only move about 1/8 inch to lock in.

Like i said, I really not into the idea of buying manual hubs. When I get a hold of Alldata, I'll check the torque spec on the bearing.