I don't believe they have provisions for motor mounts on both sides of the blocks like the dsm 4g63t does just one, that is one problem. Second problem is I believe the bellhousing pattern is different than the trucks 2.0 and dsm 4g63t so would have to figure out a tranny to run, not sure if Bill Hincher off the projectzerog.com forums has made an adapter plate for the Evo motors yet or not. It wouldn't be hard at all to bump the dsm 4g63t hp up to the hp of the stock evo 4g63t. Only thing that might make it worth it would be to swap in the evo 4g63t that has MIVEC or the new EVO X 4b11t motor.