Results 1 to 3 of 3

Thread: Code 41

  1. #1

    Array
    Status
    Offline
    Join Date
    03-26-2014
    Posts
    15
    Location

    wythville,va
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    4G64

    Post Code 41

    i have a slight rough idle and iam am getting code 41(fuel injector) does that mean the injector is bad or could you get this code for something else? I have cleaned the injectors and checked the omh and it was around 14.5 put them back in and even checked the wiring harness. Any help, would be greatly app. thanks

  2. #2



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    The only two remedies it lists in the manual for that code are wire harness/connector or injector coil resistance. If the resistance is good I would have to say check the wiring further. Check continuity all the way from the ECU pin to the injector plug and make sure they are all good. Maybe someone else will have another thing to check out. Good luck

  3. #3

    Array
    Status
    Offline
    Join Date
    03-26-2014
    Posts
    15
    Location

    wythville,va
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    4G64
    thanks i was wondering if the fuel pump having low/high pressure would give this code

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •