Results 1 to 7 of 7

Thread: transmission

  1. #1

    Array
    Status
    Offline
    Join Date
    02-25-2014
    Posts
    8
    Location

    Arcadia,WI
    Vehicle

    1988 Dodge Ram 50
    Engine

    I.D.K.?

    transmission

    I have a 88 ram 50 with a 2.6L auto trans it wont go into 4 gear unless i let off the pedal but when i do it wont stay in so it drops back into 3 and the rpms go back up it does this at 45 mph so idk what i could do for it please tell me if u know any thing.

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Have you changed the oil and filter?
    Have you checked the kick down linkage for proper adjustment?
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  3. #3

    Array
    Status
    Offline
    Join Date
    03-15-2014
    Posts
    17
    Location

    IL
    Vehicle

    1993 Mitsubishi Mighty Max
    Engine

    I.D.K.?
    Does this happen only when the truck is cold? Like when you first start out in the morning? Or all the time?

  4. #4

    Array
    Status
    Offline
    Join Date
    02-25-2014
    Posts
    8
    Location

    Arcadia,WI
    Vehicle

    1988 Dodge Ram 50
    Engine

    I.D.K.?
    it happens even after it warm so i dont really know

  5. #5

    Array
    Status
    Offline
    Join Date
    12-21-2013
    Posts
    1,258
    Location

    Maurertown, Virginia
    Vehicle

    1990 Dodge D-50
    Engine

    4G64
    Do those transmissions have any vacuum modules that help operate it? On some older American transmissions, a loose or disconnected vacuum line prevented shifting. Since I have a 5-speed manual, I cannot say, but it's an idea to consider.

  6. #6



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    I know there is a linkage adjustment that is ever so important to get correct or it will not go into high gear. Thats where I would start.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  7. #7




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    with the throttle at rest, adjust the kickdown cable so there is a slight amount of slack in it, then try it and see how it shifts. It sounds like it is too tight and is pulling the lever too far too soon. Also check to make sure the kickdown lever on the tranny is not sticking, as that will cause this problem too.Had a similar problem with my 88 ram 50 sportcab, and also had the sticking lever on a 1991 dogkota (yes i spelled it that way on purpose) that the kickdown stuck until I installed a carb return spring on it.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •