-
Associates Degree
Array
Electronic Ignition Failure
Alright, so here is the problem, I got a tachometer in my pickup, and I had the wires routed through a hole in the firewall, one of the wires insulation rubbed off, and shorted, which was the wire that comes from the distributor to the coil, causing the truck to die, so I unhooked the tach completely, and now the truck misses intermittently and will not run without the idle set very high. I have already tried replacing the coil, and that doesn't help, I also tried modifying a 2.6l ignitor to work in my 2.0l dist, but that was just an epic failure. So here is my question. Do you know where I can get the ignitor, separate from the distributor, all of the salvage yards will only sell me the entire distributor, not the ignitor separate. I cannot find any aftermarket ones that cost less than an arm and a leg, and cannot find a stock one on the internet for sale, probably because mine says DON'T REMOVE on it. So does anyone have any ideas?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks