I am new to the site but not new to the trucks. I just bought my dream truck. It is a 89 d50 with the 2.6. I am wanting to bag and body drop it, I am trying to figure out what some of you have used to do it and how you have done it. I am wanting to cut the bed as little as possible since i will be using it as my work truck and will need to use the bed to haul stuff. I am wanting to lay rocker on 20s. If anyone can give me some advice on what you have used to bag i will greatly appreciate it and any and all information on how to body drop will be more than appreciated since i have never done it. As far as parts go i am planning on using a 4 link set up in the read with slam specialty 7in bags. i am going to put the air tank under the bed and have a fuel cell made. Up front i plan on runner Michigan metal works upper and lowers with slam specialty 7in bags. For line i am going to us 3/8 lines and the valves ect.. i am not sure on yet. if yall could give me some advice and help i would be great. Thanks in advance.
Chase
Bookmarks