Found some Peterson resin-sealed markers. These are 4-chip SMD LED units. My old lenses and fixtures were just too FUBAR (google it) to deal with. They cover the OEM hole, just need to find a mounting base for them to fit the body lines and drill a couple holes.



I finally got my HID kits in. The projector housings are Bi-Xenon for high/low beam. The OEM H4 housings are (illegal) super bright high-beam/off road lights. Putting the reflector housings on a rocker switch to avoid large tickets....high beam will be effected by the projectors. (God help the sonofabitch that blinds me!!!)



2x Pilot H4x200mm reflector housings
2x 8000k Chinese metal/acrylic projectors with CCFL Angel Eyes and "Evil Eyes" daytime lamps (more to follow)
2x generic HID ballast
2x 8000k HID conversion kit for reflector housings
2x CCFL ballast (connects to parking circuit)
1x LED controller (connects to parking circuit)
1x Bi-Xenon relay harness w/high-low switching plug

To mount the projectors will require a fair bit of modding to the existing headlight holders. Will need to use my heat gun and some perspex or polycarb to create a sealed and adjustable unit, but I'm up to this minor challenge! The "Evil Eye" is stock red with the white CCFL "Angel Eye", my brother-in-law is a county cop, my Dad's best friend's son is also a county cop (different counties). I gave em both a call, red and blue forward-facing lights are a no-no for non-emergency/police vehicles. $250+ ticket here in Oregon. SO?? I have to replace the LED in the projectors with "ANY color except red or blue!!!", I went with a 4-chip SMLED unit in green. Should look cool enough and avoid tickets. They should be here by next weekend, along with the honeycomb modder's mesh for my new grille!

Tomorrow I get the electric fan installed. Woulda been today but I need some spacers/washers to blank the old fan hub on the water pump pully.