Bigger rotors

[Rickdees]

You have me wondering about the brakes on 4 wheel drive trucks, when you have an itch, you itch it.
So with that said, more input is needed. I hope Kane (MainstreaM) see's this so he'll give his much needed 2 cents worth.

Larger brakes parts from 1992 Montero compared to 1986 4x4 Power Ram 50. Matching part numbers.

1992 : MITSUBISHI : MONTERO : 3.0L 2972cc 181 cubic inch V6 MFI (S) SOHC : Brake/Wheel Hub : Wheel BearingNATIONAL Part # LM102949 More Info Taper Bearing Cone; Bore=1.7812", Length=0.78", Radius=0.14"
Front Wheel; Inner
Front Wheel; Outer
1987 : DODGE : RAM 50 CUSTOM : 2.6L 2555cc 156 cubic inch L4 2BBL (E) SOHC : Brake/Wheel Hub : Wheel BearingNATIONAL Part # LM102949 More Info Taper Bearing Cone; Bore=1.7812", Length=0.78", Radius=0.14"
Front Wheel; 4WD; Outer
Front Wheel; 4WD; Inner
~~~~~~~~~1986 Dodge Ram 50 shows different part#~~~~~~~~~~~

1992 : MITSUBISHI : MONTERO : 3.0L 2972cc 181 cubic inch V6 MFI (S) SOHC : Brake/Wheel Hub : Spindle BearingNATIONAL Part # B2012 Needle Bearing; Bore=1.25", Outer Diameter=1.5", Width=0.75"
Front Axle; Mitsubishi IFS 8" R.G.
1986 : DODGE : POWER RAM 50 : 2.6L 2555cc 156 cubic inch L4 2BBL (E) SOHC : Brake/Wheel Hub : Spindle Bearing NATIONAL Part # B2012 Needle Bearing; Bore=1.25", Outer Diameter=1.5", Width=0.75"
Front Axle; Mitsubishi IFS 7.25" R.G.

1992 : MITSUBISHI : MONTERO : 3.0L 2972cc 181 cubic inch V6 MFI (S) SOHC : Brake/Wheel Hub : Spindle Hub SealNATIONAL Part # 710146 Oil Seal; Nitrile Seal, Shaft Size=2.205", Housing Bore=2.992, Outer Diameter=2.988, Flange Outer Diameter=3.209", Width=0.472in
Front Axle; Mitsubishi IFS 8" R.G.
1986 : DODGE : POWER RAM 50 : 2.6L 2555cc 156 cubic inch L4 2BBL (E) SOHC : Brake/Wheel Hub : Spindle Hub SealNATIONAL Part # 710146 Oil Seal; Nitrile Seal, Shaft Size=2.205", Housing Bore=2.992, Outer Diameter=2.988, Flange Outer Diameter=3.209", Width=0.472in
Front Axle; Mitsubishi IFS 7.25" R.G.


1992 : MITSUBISHI : MONTERO : 3.0L 2972cc 181 cubic inch V6 MFI (S) SOHC : Suspension : Ball Joint MEVOTECH Part # MK9009 {#K9009} Suspension Ball Joint
4WD; Front Lower
1986 : MITSUBISHI : MIGHTY MAX : 2.6L 2555cc 156 cubic inch L4 2BBL (E) SOHC : Suspension : Ball Joint MEVOTECH Part # MK9009 {#K9009} Suspension Ball Joint
4WD; Front Lower
~~~~~~~1986 Dodge Ram 50 4x4 list different lower ball joint~~~~~~~~~~~
1987 DODGE RAM 50 CUSTOM 2.6L 2555cc 156cid L4 2BBL (E) SOHC : Suspension : Ball JointMEVOTECH Part # MK9009 {#K9009} Suspension Ball Joint
4WD; Front Lower
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
Upper ball joint on both 86 and 87 mighty max and dodge ram 50 show different part#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
1992 : MITSUBISHI : MONTERO : 3.0L 2972cc 181 cubic inch V6 MFI (S) SOHC : Drivetrain : Universal Joint
FEDERATED Part # 398 Front Shaft at Front Axle; 4WD Front Shaft at Transfer Case; 4WD
1986 : MITSUBISHI : MIGHTY MAX SPX : 2.6L 2555cc 156 cubic inch L4 2BBL (E) SOHC : Drivetrain : Universal Joint
FEDERATED Part # 398 Front Shaft at Front Axle; 4WD Front Shaft at Transfer Case; 4WD
1986 : DODGE : RAM 50 CUSTOM : 2.6L 2555cc 156 cubic inch L4 2BBL (E) SOHC : Drivetrain : Universal Joint
FEDERATED Part # 398 Front Shaft at Front Axle; 4WD Front Shaft at Transfer Case; 4WD

Mighty Max/Ram 50 4x4

91 Montero


There IS MORE reseach to do, so don't jump the gun and blame me.
Will the 91/92 Montero spindle/knuckle fit the 1st. gen 4x4 trucks?