Sorry for the delay but here are some more pictures of the finished motor in the truck!!!
IMAG0054.jpg IMAG0053.jpg

Below is the Stainless Steel Exhaust!!!!
IMAG0011.jpg vs. IMAG0012.jpg
original restrictive header downpipe vs. header w/ 2.5" elbow fitted to maximize flow. Then 2.5" - 2.25" smooth transistion with reinforcment ring.


IMAG0018.jpgIMAG0019.jpgIMAG0017.jpg

1st picture-above is the complete assembly as it is hung under the truck.
2nd picture-High flow Magnaflow cat(part# 50005) attached to Magnaflow 4" x 22" ( part# 10345 ).
3rd picture- factory exhaust hanger modified with removable ubolt instead of being welded.

IMAG0058.jpgIMAG0059.jpg

1st picture- assembly with bracket installed to go over frame
2nd picure - muffler with mandrel bend 90deg elbow into a 45deg to exit in front of the rear tires.

**** for this to work where the flanges are the factory heat sheild needs to be trimmed out just a little bit to get rid of really bad vibration.****