Results 1 to 2 of 2

Thread: Headlight switch issue

  1. #1

    Array
    Status
    Offline
    Join Date
    04-10-2011
    Posts
    256
    Location

    WA
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    6G72

    Headlight switch issue

    The base of the stem on my light switch on my '91 cracked off, so that the barrel just spins around and won't turn lights on or off. I pulled the unit off of my project '94, installed on the '91 and now I have brights but no dim lights. Side markers and tails all light properly but no regular headlights. What am I missing ?
    Update. Turns out that my battery hold down broke, letting the battery slide against the headlamp plug. Apparently this shorted out the low beam circuit and blew the 15 amp fuse. Replaced the hold down and fuse and my lighting is back in working order.
    Last edited by lush90; 09-29-2013 at 01:33 AM.
    1990 MM 4x4 3.0
    1991 MM 4x4 3.0 Diamonte
    1994 MM 2wd (work in progress)

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,614
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Are you talking about the knob? On mine there was an Allen set screw that held it to the stem. High and low was on the column in the turn switch.
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •