when you did the belt, did you use the corect mark for the cam? the book is not clear in there picture. It's easy to get it off 1 tooth and it will be advanced.
DSCN4902.JPG
when you did the belt, did you use the corect mark for the cam? the book is not clear in there picture. It's easy to get it off 1 tooth and it will be advanced.
DSCN4902.JPG
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
Yes I went off of that mark. The actual mark on my cam was extremely hard to find since I is not dimpled in but chipped from the teeth.
Camoit, do you line the dimple on the gear to the notch? Your picture shows it off somewhat... .
Thanks,
Bill e
The dimple in the cam gear lines up below the top of the head. There is a casting mark on the head it will line up to.Originally Posted by Bill e
The "Notch" you are talking about is the top of the head and the bottom of the valve cover.
Another way to look at it is: The cam dot is one tooth down from the top of the head.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
Reply With Quote
Bookmarks