Results 1 to 5 of 5

Thread: Need help with a tranny

  1. #1

    Array
    Status
    Offline
    Join Date
    04-30-2013
    Posts
    6
    Location

    Valley City, ND
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    4D55

    Need help with a tranny

    I am working on a 83 mm TD 5spd tranny. I would like to know what the trick is to getting the counter gear and mainshaft out. I have the tail section off and have all obvious retainer off. but it just wont come apart. what simple thing am i missing? is there a thread somewhere for this? i am new to this site any help would be great thanks. Also i am sell my extra parts to fund another project i have basically a whole 83 mmsp TD i am parting out.

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    There are cir clips between the gears. But the counter shaft bearings must come out first so it can get out of the way of the main shaft. But don't quote me on this trany, I haven't taken one of the diesel ones apart.

    Try looking in the manual section > manual in the over 216 manual thread. We might have a manual in there.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  3. #3

    Array
    Status
    Offline
    Join Date
    04-30-2013
    Posts
    6
    Location

    Valley City, ND
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    4D55
    ok thanks, do you know which gear have circlips?

  4. #4

    Array
    Status
    Offline
    Join Date
    04-30-2013
    Posts
    6
    Location

    Valley City, ND
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    4D55
    no tranny manual there for it. from what i seen.

  5. #5



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Once you drop the counter shaft. the main shaft will come out the rear. Then the clips are easy to see. Look in the first gen factory manual. It should cover your trany or be real close to it. I was thinking you had a 2nd gen. My bad.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •