I'm a little confused about the return line on the 32/36. I don't see this green arrow connection on my Weber. I guess mine wasn't a "California" model. I see there are the two inlets at a 30* angle for fuel, so you can get fuel no matter how you orient the carb. My question is since I don't have this return line provision, could I use the 2nd, plugged up inlet as a return line? Or would that create a fuel "short circuit" and bleed off fuel meant for the bowl?

DGV-connections.jpg

I also see that the bowl vent is sealed off on mine. So I can drill and NPT tap this, attach a fitting and send the line to the charcoal canister?

I'm doing all of this because the Chinese fake Weber I bought perpetually stunk of gas, had random weeping gas leaks and I want to do it the right way this time. Also concerned about vapor lock and drivability issues. I just want this thing vented and sealed 100%.

BTW, this is a great, very thorough article on Weber 32/36 I found:

http://datsun1200.com/modules/mediaw.../36_Carburetorhttp://datsun1200.com/modules/mediaw.../36_Carburetor