Weber 32/36

[pennyman1]

To adjust the choke, loosen the 3 screws and take the choke spring and turn it until the choke plate closes. Push the pedal to the floor once, the plate should open slighty. then start the truck - it should be on the first step of the cam - tap the pedal, it should step down to fast idle - adjust fast idle screw to 1400 to 1600 rpm. The carb will step down to regular idle as the choke warms up - if it drops too fast to curb idle, increase the spring tension on the choke.

[kcminitrucker]

To adjust the choke, loosen the 3 screws and take the choke spring and turn it until the choke plate closes. Push the pedal to the floor once, the plate should open slighty. then start the truck - it should be on the first step of the cam - tap the pedal, it should step down to fast idle - adjust fast idle screw to 1400 to 1600 rpm. The carb will step down to regular idle as the choke warms up - if it drops too fast to curb idle, increase the spring tension on the choke.

is the screw in the center of the pic right behind the choke adjustment the fast idle adjustment?DSCN5477.jpg