Results 1 to 3 of 3

Thread: Coolant Flush Help

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    03-12-2013
    Posts
    40
    Location

    Germantown, Maryland
    Vehicle

    1986 Dodge Ram 50
    Engine

    G63B

    Coolant Flush Help

    I thought I would do an easy job today and flush the coolant from my 50 with the 2.0L. I've got one of those flush kits that come with the "T" adapter, but I can not figure out where to install the T. It is supposed to go into the coolant inlet hose. on my truck I see two hoses going into the firewall where the heater is. It seems like one of these should be the inlet hose but these hoses are a larger diameter than any of the "T" adapters that came with the kit. The hoses come and go in all different directions one splits off and goes into the carb and the other wraps around the side of the engine and eventually ends up at the water pump. This hose seems like the one to cut into but it's metal.

    How do you all usually go about flushing your coolant?

  2. #2

    Array
    Status
    Offline
    Join Date
    03-12-2013
    Posts
    40
    Location

    Germantown, Maryland
    Vehicle

    1986 Dodge Ram 50
    Engine

    G63B
    Ok never mind I figured it out... the T adapter is large enough, I'm an idot

  3. #3



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    ha ha ha ha,,, OK self answering. Otherwise you would get 20 responses on how to and how not to do it. Glad to see you got it.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •