Results 1 to 4 of 4

Thread: weber help....

  1. #1

    Array
    Status
    Offline
    Join Date
    02-19-2013
    Posts
    21
    Location

    washington st.
    Vehicle

    1980 Dodge D-50
    Engine

    G54B

    weber help....

    just installed a weber 32/36 on my 2.6 runs great, no problems other then i cant figure out how to set the fast idle. instructions with the carb says to do it when the motor is cold, press the throttle pedal to the floor once an let it off, then start it. it sez it should idle around 2200 rpm on the idle cam. mine will barely idle. i have tried adjusting the fast idle screw an nothing. what am i missing here or doing wrong?

  2. #2



    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,112
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    On the side of the carb where the +12 volts go, that it the choke spring. loosen the 3 screws and rotate the amber piece - the choke plate will close, and the cam the fast idle screw rides on will move up and speed up the motor. My weber was set so the choke wouldn.t arm , let alone fast idle until I made the adjustment.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3



    Array
    Status
    Online
    Join Date
    03-16-2011
    Posts
    3,614
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Also in this thread, post #3 I go through the steps of adjusting the choke. http://www.mightyram50.net/vbulletin...7790#post17790
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

  4. #4

    Array
    Status
    Offline
    Join Date
    02-19-2013
    Posts
    21
    Location

    washington st.
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    got it! thanks guys

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •