Results 1 to 5 of 5

Thread: Carburator Question PLZ HELP!!!!

  1. #1

    Array
    Status
    Offline
    Join Date
    02-16-2012
    Posts
    26
    Location

    Lehigh Acres FL
    Vehicle

    1989 Dodge Ram 50
    Engine

    Please Select Your Engine Type

    Carburator Question PLZ HELP!!!!

    I had a buddy of mine replace the motor. We are having issues in getting it to idle smooth. Is there anyone who has a STOCK 2.0 carburated? If so can someone please post pics of the Driver inside fender and Carb? I have 2 extra vacuum lines I can't find where they plug up to on carb. Also whats the best way to get the Idle right?

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,614
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    You have the feed back carb, correct? If you look in the manual section> over 216 manuals> then find the Montero and it covers the mighty Max truck. That one has a couple of vac diagrams in there. Sorry but I'm first gen. OH there is also a post in the tuning section. I think one of these might have just what you are looking for.

    http://www.mightyram50.net/vbulletin...ghlight=vacuum

    http://www.mightyram50.net/vbulletin...ghlight=vacuum
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

  3. #3

    Array
    Status
    Offline
    Join Date
    02-16-2012
    Posts
    26
    Location

    Lehigh Acres FL
    Vehicle

    1989 Dodge Ram 50
    Engine

    Please Select Your Engine Type
    Thanks for the information. But my problem is most of my vacuum lines are not color coded. I am needing help to find out where 2 vacuum lines that are behind the silver ECU box ( some kind of purge valve) Its attached on the fender. I also currently have 4 vacuum lines plugged on my truck. I know 2 of them are supposed to be plugged. Would the EGR valve cause my truck to kind of hit a high Idle when I'm sitting @ a stop light? I know my Carb is way out of adjustment. But its runs not too bad . I replaced the motor with one that was rebuilt. Yep all stock. So I'm just trying to get it running like new again lol.

  4. #4



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,614
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    That sounds like the AC control valve. The EGR would cause a rough idle. Ya there is no color chart. might be something on your hood. Unless its been crashed and replaced.
    Members come and members go, But the board keeps track of them.
    Check out the Fear Monger by
    clicking HERE.

    The MightyRam50 site is sponsored in part by On Site Concrete Inc.

  5. #5

    Array
    Status
    Offline
    Join Date
    02-16-2012
    Posts
    26
    Location

    Lehigh Acres FL
    Vehicle

    1989 Dodge Ram 50
    Engine

    Please Select Your Engine Type
    Gotcha. If thats the case then I know where one of the lines go. Now as far as doing adjustments on the factory carb.... I know its a pain to get it right but any suggestions on how to fine tune it?

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •