Hello,
I have an unlevel ride height.

I just redid all the suspension.

New polyurethane bushings and shocks in the back.

Front ball joints , tie rods shocks etc.

Torsion bars were put in with the indexing marks lined up.


My truck sags 3/4 inch lower on the driver side.

I adjusted the torsion bar bolt on the passenger side to level it out but now the bolt threads are showing 1/4 inch less but it is still not level.

Rear is the same.

Are my springs shot on the driver side?

Or did I screw something up putting back in the lower control arms?

Any help would be great.

Shake.