the problem im having is i replaced the stock carb with a weber carb on my ram 50 and took off all the smog crap on the engine and the engine bay and had to replace the motor cause the ballancer shafts froze up so im trying to get it from deiseling i can un plug the ecm and it will still run but after it gets warmed up it deisels when i turn the engine up the timing is set to 7 degrees and the wiring is a little screwy cause the black red and black and white they are wired together and the red black that goes to the starter will kill the engine if it is hooked up to the balast resistor