Been collecting parts and working on getting the wheels ready for installation on the MM. I don't have a lathe so I had to come up with something that would work to drill out the center holes on the wheels. I first made a cardboard template 3" for the center hole to 3 11/16" hole size made with a compass, bolted together through center hole, and scribed on to both sides of wheel. The first wheel I used a die grinder....man that took forever. So I came up with using a 3 5/8" hole saw, with a homemade guide bolted through lug holes to hold the drill bit on center to remove the bulk and finish with the die grinder. Worked greatAll 4 wheels now fit and are mounted to tires. I just need a weekend to finish the front end rebuild/drop and install wheel/tire combo. Stay tuned.
Reply With Quote
Bookmarks