
Originally Posted by
Andy 2
Well, I got the truck back from the tranny shop and the throttle control cable is fixed. Turns out the cable sheath was pulled out of the crimp connector at the tranny end. They had to drop the pan to get the cable out and were able to push the sheath back into the crimp with a lot of elbow grease. I figure the apprentice who took the intake off did so without unbolting the cable as it would take quite a bit of force to pull that cable apart. The truck drives great now, shifts up and down as it should. Now I'll start monitoring the fuel economy( which is how all this started). I only drive this truck on the days when it's dry, as they really salt the roads here in the winter, so it may take some time.
Bookmarks