Results 1 to 11 of 11

Thread: transmission question 2wd vs 4wd

  1. #1

    Array
    Status
    Offline
    Join Date
    12-04-2012
    Posts
    498
    Location

    New Bern, NC
    Vehicle

    1986 Dodge D-50
    Engine

    G54B

    transmission question 2wd vs 4wd

    I asked this in another thread but I thought it would be more appropriate in this section since it was off topic. Can I swap out a tailshaft of a 5-speed trans from a 2wd to a 4wd trans? I'm looking to take a 5-speed 4wd trans and convert it to a 2wd. Or if not are there any trans that would fit the 4D55 that can be found in the gas engines? Or would it be better to try to make my 2wd truck into a 4wd? I know that would require a whole re-work of the front end to say the least.

  2. #2




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    it just requires the 2wd tailshaft and swap it with the 4wd tailshaft - everything else is the same.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3

    Array
    Status
    Offline
    Join Date
    12-04-2012
    Posts
    498
    Location

    New Bern, NC
    Vehicle

    1986 Dodge D-50
    Engine

    G54B
    And i can get the tail and driveshaft from any 5 speed regardless of engine correct?

  4. #4




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    I would think so, but if you could find one from the same model tranny, it would fit for sure. The main models are km144 and km132 - if your friend has a tailshaft from a starquest he can spare, that should work.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  5. #5

    Array
    Status
    Offline
    Join Date
    12-04-2012
    Posts
    498
    Location

    New Bern, NC
    Vehicle

    1986 Dodge D-50
    Engine

    G54B
    I know there's no 4d55s in the yard. There is a 2.0, 2.4 and 2.6L. I'm sure one of them would have the same trans as mine. If i'm not mistaken it's got the big plate on the bottom of the trans. I'm not sure about the numbers or how to identify the differences.

  6. #6




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    there is a number on the side of the case, but any of those would work.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  7. #7

    Array
    Status
    Offline
    Join Date
    12-04-2012
    Posts
    498
    Location

    New Bern, NC
    Vehicle

    1986 Dodge D-50
    Engine

    G54B
    That's good to know. That was my biggest obsticle. Knowing it's easy to convert it to a 2wd then I'm pretty committed on getting this truck and doing the swap now. I have to see it first. He says it has no compression at all after overheating. I've read it could happen on the diesel. Worst case get a 4d56 head. The doner isnt much to look at (that's why he wants $500) but I hope to pick it up next weekend and have pics in the next couple weeks of the progress. Maybe even have some first gen parts for sale since all I need is the drivetrain and harness.

  8. #8




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    If the front bumper is good, I would be interested. Let me know.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  9. #9

    Array
    Status
    Offline
    Join Date
    12-04-2012
    Posts
    498
    Location

    New Bern, NC
    Vehicle

    1986 Dodge D-50
    Engine

    G54B
    image.jpg
    I do have pics he sent me.
    No luck on the bumepr tho. End caps are good tho lol

  10. #10

    Array
    Status
    Offline
    Join Date
    01-20-2013
    Posts
    20
    Location

    Norcal
    Vehicle

    1983 Dodge Power Ram 50
    Engine

    4D55-T
    This thread answered a burning question I've had. I'm glad to hear the tailhousing interchanges with the transfer case. But to throw another wrench in the works: it sounds like you have a 4D55, and the donor might be from a gas engine? It appears that the transmission don't have removable bellhousings. Are input shaft dimensions and bellhousing boltpattern the same between gasser transmissions and diesels?

  11. #11




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    The answer to both questions is yes - the mounting pattern and input shafts are the same.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •