Results 1 to 5 of 5

Thread: sloppy steering on 1980 d50

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    01-06-2013
    Posts
    11
    Location

    nipomo, ca
    Vehicle

    1980 Dodge D-50
    Engine

    4G15

    sloppy steering on 1980 d50

    hey i have a 1980 d50 and the steering is sloppy and you have to the wheel alot to barly turn the tires it feels like, im not sure if thats just how they are of if i can adjust something to fix it

  2. #2




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    is it a manual box or power? There is an adjustment on the top - loosen the nut and turn the screw a little bit at a time until you get the slop out. Check the shafts coming out of the box to be sure that the slop is not from worn bearings in the box or bad front end parts.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3

    Array
    Status
    Offline
    Join Date
    01-06-2013
    Posts
    11
    Location

    nipomo, ca
    Vehicle

    1980 Dodge D-50
    Engine

    4G15
    It has a box thats really hard to get to lol

  4. #4




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    Geronimo is a 1980 and power at that, which makes it tougher. Get to it from under the fender instead of from on top. If you overadjust you can bind it easily.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  5. #5



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    You should first check the tie rod ends and the idler arm. With the engine off unlock the wheel and have some one rock the wheel. While there rocking the wheel look at the tie rod ends. They should move the spindles and all the other parts as one. If you see somthing moving before another part does then there is a problem. The tie rods , tie rod ends, spindles, pitman arm, and the idler arm should all move at the same time, speed and the same amount. Once you know the ends and idler arm are good then you can look at the box it's self.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •