Recommend a turbo for the 2.0L

[LSR Mike]

I'm running 10:1 with 30lbs of Boost, I do use 110 race gas, but you should be able to run stock CR and 10-12 on premium.
I'm using a PTE 6262 Turbo on the 2.4L.

For DG Headers I have a pretty good setup already for a Turbo manifold, what we really need is a good intake!

[camoit]

I'm running 10:1 with 30lbs of Boost, I do use 110 race gas, but you should be able to run stock CR and 10-12 on premium.
I'm using a PTE 6262 Turbo on the 2.4L.

For DG Headers I have a pretty good setup already for a Turbo manifold, what we really need is a good intake!

Call him up. He can build you one.

[LSR Mike]

Call him up. He can build you one.

Camoit, I've already had mine built.

this is what was removed,



This is the result after welding the tank back to the manifold.



But if you're going to Turbo, you need to consider both manifolds.

[camoit]

But if you're going to Turbo, you need to consider both manifolds.

I'm not going to turbo. I'm just getting things built for the other guys.

If anything I would have him make manifolds for a single side draft carb.
Well you have probably run into them out on the track.