ok found good and bad stuff within the inside of engine. Seems like the bearings were all on its way out and shredding apart haha. Was just starting to shred as it wasnt in the oil when i did an oil change. a few weeks ago after i ran the truck with less than a quart of oil and it started knocking like a bitch. didnt know it was that low till i did oil change. it used alot of oil due to bad piston rings -.- Anyways pictures it is!!


Oil Pan before removal



Erm blue rtv coming out of it? Sloppy mechanic if it comes out back then it goes inside engine too. bad! use a gasket if it had one factory -.-!



Inside the engine right after oil pan removal.




Oh hey look at all the shiny shreds of metal woohoo! Wait bad not good!



After removing most of the bearings and caps



Main bearings with the caps.



The pistons with rocker arms still connecting along with the bearing caps and bearings back on the end of the rockers.




another view of inside the engine with only the crank in it. 2 journals have some minor lines in it i can feel with my finger nail. not good, but doesnt seem to me like they'd hurt to leave alone.



hey the engine block shrunk! It was so much bigger when it had everything on it lol.