1988 Macroab

[Turbo88Max]

New to this forum but not Mighty Max's.

Well here's my build thread/restore thread for my 88' Macrocab.

Here's sticky:
1988 Mitsubishi Mighty Max Macrocab 2wd
2.6L truck originally 5 speed originally
S83 paint code with brown interior
147K Miles at time of purchase
No pwr, no cruise, no P/S, no A/C

Drivetrain:
2.6L Turbo swap from an 88' Starion
Big FMIC
Blitz SS BOV
Blaster SS coil
walbro 255lph inline fuel pump
12" Electric fan
open element Air filter
NGK-R plugs
Stage 2 clutch

Suspension:
2" drop spindles
3" drop blocks
middle leaf missing

Wheels n' rubber:
17" Cadillac Escalade rims
245/45R17 Continental's in rear
235/45R17 Pirelli's in front

Misc.:
Boost gauge
Tach
Water Temp gauge


Problems to be addressed for restore:
Body work (mostly Box)
Paint obviously
Interior (was brown, painted black.... horrible, flaking everywhere)
Speakers in dash (stock little 3" was replaced with 4" that don't fit and look like poop)
Needs alignment
Need to go through rear (I don't think it's centered or something.)

I will update with more and more pics as I go and once I'm happy to a point with the exterior or if I start getting a few performance I'll update with my peformance plans.

One plan is 3" stacks 4-5" above the cab.

[Turbo88Max]

Pay no attention to this currently, will put more pictures here.

[4doorciv]

Welcome to the board. I hopie you can help out other members who are interested in doing the same swap you just did. Your max looks great, interesting choice in mounting the front mount intercooler, and I think yours would be the second max I've seen with that visor on the windshield.

[joey_crandall]

are you on sqc as well? the prelude in the back is very familliar?

[crvtec90]

Nice truck man. I like the visor and the side exit exhaust in front of the rear wheel. Did you get slightly different size tires on purpose or did it just end up that way? Just wondering if it helped to tuck them in front or something. Also, did you use the truck trans or the starion and where is the stage 2 clutch from?

[LethalEthan]

great lookin truck! welcome aboard

[4doorciv]

My intercooler looks very similar to yours, but mines is flipped the other way. Instead of pointing down, it's pointing up in other words. That way I still kept the valence intact.

[pennyman1]

I would be very careful about running a 6 puck clutch pack with a tranny thats not rebuilt. Those clutches grab violently, and will rip a weak tranny apart; hydralic clutch setup won't fix that, and its overkill for a street vehicle. You'll hate it after a week of street driving.

[Turbo88Max]

Actually I had a 6 puk in a VR-4, yea it was a little hard to get used to but well worth not worrying about slipping a clutch. My Quest trans is fine, nothing wrong with it, I believe it was a low mileage one as well.