Page 1 of 2 12 LastLast
Results 1 to 25 of 27

Thread: Rim&tire?

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type

    Rim&tire?

    What size rim and tire do I get if I don't want the rim and tire STICKING OUT OF THE FENDER I WANT IT TO BE FLUSH OR A LITTLE BIT IN NOT STICKING OUT.THINKING ABOUT GETTING THESE RIMS http://static.summitracing.com/globa...320-5055_w.jpg

  2. #2

    Array
    Status
    Offline
    Join Date
    07-07-2012
    Posts
    99
    Location

    charleston ar
    Vehicle

    1987 Dodge Ram 50
    i think what your needing to know is the offset of the wheel. The offset of a wheel is the distance from its hub mounting surface to the centerline of the wheel. it can be positive, negative, or zero. your offset is at 0. so i would find some wheels that are + or - maybe 2 or 3 and they should work for you no problem. btw that your pic looks, the offset is looks negative and it might stick out on you. (i could be backwards.)

  3. #3




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    The stock rim as a 4 1/2 " offset for the 14 x 6jj steel spoke rims original on the truck. What you need to ask is the back spacing of the rim - less than 4 1/2 means it will stick out further from the hub, more than 4 1/2 it will be further inboard. Rim width also is important - The wider the rim the further it can be from the hub. Positive offset is forward of the centerline, negative is behind the centerline - all measurements for offset are from the back of the wheel relative to the centerline of the wheel. Also, the hole in the center need to be at least 108 mm or 4+" or the wheel or hubs will need to be modified or spacers will need to be used for the wheel fit on the hub - these are wide hole wheels 6 x 5.5 or 6 x 139.7mm.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  4. #4

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    So if I go with a 15x6or7" rim and the back spacing is more then 4 1/2 the rim will not stick out pass the fender?

  5. #5

    Array
    Status
    Offline
    Join Date
    06-27-2012
    Posts
    47
    Location

    Alabama
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G52
    Quote Originally Posted by Ram50808 View Post
    So if I go with a 15x6or7" rim and the back spacing is more then 4 1/2 the rim will not stick out pass the fender?
    yes,that is about what my rims are on my truck.15x6 with 4 1/2 inch bs
    fit fine

  6. #6

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Thanks man that's what I needed to know

  7. #7

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type

  8. #8

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Just to b sure is this the size I'm looking forU.S. Wheel 97-5760P - U.S. Wheel 97 Series Chrome Modular Wheels

    Image is a representation of this part. Actual part may vary.

    $70.95


    + Wish List
    + compare
    Wheel, Modular, Steel, Chrome, 15 in. x 7 in., 6 x 5.5 in. Bolt Circle, 4.5 in. Backspace, Each
    Estimated Ship Date: 7/30/2012


    Email
    Overview
    Suggested Parts
    Show All
    Large ImageInstructions
    Image is a representation of this part. Actual part may vary.

  9. #9

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Got a pic of your truck?

  10. #10

    Array
    Status
    Offline
    Join Date
    06-27-2012
    Posts
    47
    Location

    Alabama
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G52
    here ya go
    Attached Images

  11. #11



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    just FYI, as you go up in rim width, ie 6 to 7, then the backspacing and/or offset also needs to go up to compensate for the added width if you plan on not stickig out.

  12. #12

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Ok ill post pics once I get my truck going again I actually have the Titan rims for my truck now but don't know what style I want for my truck yet been that the Titan rims are 18" I'm thinking it might look to big that's y I'm thinking of going with like a 15-16" rim so it doesnt look like more rim then truck if u guys know what I mean!if I were bagged then it wouldn't matter.thanks for the help guys.

  13. #13

    Array
    Status
    Offline
    Join Date
    06-27-2012
    Posts
    47
    Location

    Alabama
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G52
    im planning on going 17-18 eventually

  14. #14



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    Check out my truck, I have 18's and am only static dropped, I think they look great personally.

  15. #15

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Nice truck! I think your truck looks better with the 18's because it's extra cab so to me it fits the overall truck more.I guess it all depends on how low my truck sits once I get the cab and bed back on I'll post some pics. Ive got 2"drop spindles,cut 1 1/2 coils off the front,and 4" blocks with pulled middle leaf in the back.http://static.summitracing.com/globa...97-3512_SN.jpg different truck but those r the rims that I have

  16. #16

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Sorry wrong pic not those rimshttp://i1184.photobucket.com/albums/z333/parrell456/1986%20Dodge%20D50%20Sport/RHP86D50.jpg

  17. #17

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Been searching the net and can't find anybody with a d50 or mighty max that has done it in JDM style seen a lot of toyotas and vw caddy trucks but none of our trucks anybody know of any pics or anything on this JDM STYLE it's different but I like it just don't know how our trucks would look!http://t3.gstatic.com/images?q=tbn:A...wZ79SCJaC5a8xC just a few pics I'm guessing the rim and tire set up is what makes it THAT JDM STYLE!

  18. #18




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    dead link
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  19. #19

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Sorry I can't get the link to post but I think JDM style is bigger fenders and small and wide rims and tires but not real wide kinda a racey look to um http://www.thedrifttruck.com/Drift%2...0007NG.jpgthis the only max/d50 I could fine that's close to a JDM STYLE TRUCK! I like the look of the front rims if it would sit a little more in the fender that would b NICE WITH THAT DEEP STYLE OF RIM!

  20. #20

    Array
    Status
    Offline
    Join Date
    06-19-2012
    Posts
    96
    Location

    Hilo hawaii
    Vehicle

    1989 Dodge D-50
    Engine

    Please Select Your Engine Type
    Sorry dead link again

  21. #21



    Array
    Status
    Offline
    Join Date
    06-12-2011
    Posts
    218
    Location

    Tulsa, OK
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    4G64

  22. #22

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    157
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B
    Quote Originally Posted by Sergio T View Post
    I want the hood!!!!!!!!

  23. #23


    Array
    Status
    Offline
    Join Date
    03-21-2011
    Posts
    767
    Location

    WA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    Lol at JDM style.

    I like mine simple. Nothing too flashy. I'd be happy with titans. If you think it sticks out too far, the 4x4 models have a small fender flare that adds like a half an inch or so. IMO. 5 lug swap opens up more choice of rims. Something like a VIP style Lexus ls400 if that's what you looking for.

  24. #24

    Array
    Status
    Offline
    Join Date
    10-17-2011
    Posts
    31
    Location

    london, KY
    Vehicle

    1989 Dodge Ram 50
    Engine

    G54B
    my ram came with these 15's on them can any one tell me if they were offered from the factory or if they are aftermarket ??100_0654.jpg100_0652.jpg

  25. #25

    Array
    Status
    Offline
    Join Date
    06-27-2012
    Posts
    47
    Location

    Alabama
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G52
    Quote Originally Posted by baker4401 View Post
    my ram came with these 15's on them can any one tell me if they were offered from the factory or if they are aftermarket ??100_0654.jpg100_0652.jpg
    Those are the factory chrome 15's

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •