Results 1 to 11 of 11

Thread: wobbly front end and slight vibration over 50?

  1. #1

    Array
    Status
    Offline
    Join Date
    03-27-2012
    Posts
    120
    Location

    Bonney Lake, WA
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    Please Select Your Engine Type

    wobbly front end and slight vibration over 50?

    What could be my problem? jusst got her running and im already scared to drive it

  2. #2




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    Lower control arm bushings - they wear oval shaped and cause the arm to move back and forth. Also replace the strut rod bushings and check the upper control arm bushings. Bushings are available in urathane to give a firmer bushing and longer life.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3

    Array
    Status
    Offline
    Join Date
    03-05-2012
    Posts
    96
    Location

    San Jose, CA
    Vehicle

    1983 Dodge Ram 50
    Engine

    4D55-T
    eurethane for 2wd lower control arm bushings? Who & where?
    I keep blowing them out every year.

  4. #4



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    Energy suspension makes some, plus some others I think. Just go on google and search "energy suspension mighty max control arm bushings" and a bunch of hits will pop up.

  5. #5

    Array
    Status
    Offline
    Join Date
    03-27-2012
    Posts
    120
    Location

    Bonney Lake, WA
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    Please Select Your Engine Type
    Should I just go all out and replace all my bushings, struts and everything? I can't even go down the main highway in bonney lake and it's only 45 without wobbles. I'm hoping new tires will make a better ride

  6. #6



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    If you can afford it might as well do them all, it isn't that much really. But if not then do the strut rods atleast too

  7. #7

    Array
    Status
    Offline
    Join Date
    03-27-2012
    Posts
    120
    Location

    Bonney Lake, WA
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    Please Select Your Engine Type
    Quote Originally Posted by DroppedMitsu View Post
    If you can afford it might as well do them all, it isn't that much really. But if not then do the strut rods atleast too

    I will look into that. I was under the truck today just comparing to my brothers mazda b2600 4x4 that my setup suspension wise is better besides I have weak torsion bars. Is that true with these trucks? Should I upgrade those soon? if so what can I replace them with?

  8. #8

    Array
    Status
    Offline
    Join Date
    03-05-2012
    Posts
    96
    Location

    San Jose, CA
    Vehicle

    1983 Dodge Ram 50
    Engine

    4D55-T
    The 4x4's have good choices for bushings, the 2wd have next to nothing to work with.
    Check ebay for 4x4 "energy suspension" kits.
    I can't believe how primitive the 2wd front suspensions are. I've got 1965 Corvair with the exact same front suspension as my 1983 Royal turbo diesel 2wd. Used my Vair tools to rebuild the front suspension with burly new coils.
    Gak.

  9. #9

    Array
    Status
    Offline
    Join Date
    11-22-2012
    Posts
    7
    Location

    Scottsdale, AZ
    Vehicle

    1989 Dodge Ram 50
    Engine

    G63B
    Hey guys. So Im trying to tackle changing out the lower control arm bushings. It seemed fairly straight forward. I unbolt the one side and the two bolts on the other and I pull out the bolt somehow. My question is where should I be jacking this thing up to free it? Should I have the wheel off or can I just get under there and change them? I dont want to fuck myself over but it seems too easy that Im missing something. Thanks.

  10. #10


    Array
    Status
    Offline
    Join Date
    08-31-2011
    Posts
    832
    Location

    Calgary, Alberta, Canada
    Vehicle

    1981 Dodge D-50
    Engine

    Ford V8
    you're 1/2 way there.You need to jack up the truck and carefully lower the control arm. you can pull the back side bushing after you get the bolt out,then lower the control arm and pull the front side bushing out.Clean the inside of the control arm,grease,install front bushing,lift control arm up,install back bushing,Install bushing bolt and tighten everything. I just put in the energy suspention ones in a few days ago.Just put some jack stands just in front of the tranny X-member and let all the pressure off the front springs, you might have to undo the shock as well.

  11. #11

    Array
    Status
    Offline
    Join Date
    11-22-2012
    Posts
    7
    Location

    Scottsdale, AZ
    Vehicle

    1989 Dodge Ram 50
    Engine

    G63B
    Thanks. Ill be doing this tomorrow.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •