Results 1 to 7 of 7

Thread: g54b rocker arm assembly

  1. #1

    Array
    Status
    Offline
    Join Date
    07-07-2012
    Posts
    99
    Location

    charleston ar
    Vehicle

    1987 Dodge Ram 50

    g54b rocker arm assembly

    well i have to replace my rocker arm assembly and im having trouble finding anyone that has a stock or aftermarket assembly. does anyone know where i could possibly find one.

  2. #2

    Array
    Status
    Offline
    Join Date
    04-10-2011
    Posts
    57
    Location

    Sidon,ms
    Vehicle

    1988 Dodge Ram 50
    Engine

    G54B
    Hydraulic or mechanical?

  3. #3

    Array
    Status
    Offline
    Join Date
    07-07-2012
    Posts
    99
    Location

    charleston ar
    Vehicle

    1987 Dodge Ram 50
    i think its mechanical

  4. #4




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    If its for an 87, it has hydraulic lash adjusters - all 85 and up mitsus came with them. What happened to the original ones - you break one or more? One trick that the starquest group does with the 2.6 hyd motors is to swap the rockers with rockers from the 3.0 v6 - they are 1.6 ratio for more lift, and they use the same lash adjusters - they also had a roller tip for the cam. They also eliminate the jet valve actuation part of the rocker arm. For best performance, you should replace the cam with one ground for the 1.6 roller rockers - Oregon cam grinders can help you out there.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  5. #5

    Array
    Status
    Offline
    Join Date
    07-07-2012
    Posts
    99
    Location

    charleston ar
    Vehicle

    1987 Dodge Ram 50
    idk what happened to it. it just started making noise. so naturally i tried to figure out what was wrong. the first rocker arm was the only one that was bad. so past that i figured it was time to fix it so it wont get worse.

  6. #6

    Array
    Status
    Offline
    Join Date
    12-15-2011
    Posts
    8
    Location

    Qsite az
    Vehicle

    1987 Mitsubishi L200
    i have a set of the roller rocker arms

  7. #7

    Array
    Status
    Offline
    Join Date
    07-07-2012
    Posts
    99
    Location

    charleston ar
    Vehicle

    1987 Dodge Ram 50
    thanks but it was just the hydraulic lash adjuster.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •